- Postcode districts
- GU13, GU51, GU52
- Nearby
- Farnborough, Aldershot and Yateley
- Guide price
- £7,300–£14,500
- Typical time on site
- 6–12 working days
- Water
- Hard across most of Hampshire
- Survey
- Free, at your home
What does a loft bathroom cost in Fleet?
Guide price in Fleet: £7,300–£14,500 including VAT, depending on the room and what you choose. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Signature
- Pump or macerator where needed
New loft bathroom
- Formed in an existing loft room
Guide prices for Fleet including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Fleet
In Fleet we cover GU13, GU51 and GU52; we also cover Farnborough, 3.4 miles away, and Aldershot.
In Fleet, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Fleet loft conversion has a bedroom but no bathroom, the survey starts with where the soil stack runs and how much headroom you have. If your Fleet house has a combi boiler, a loft shower can usually run on mains pressure without a pump.
Water across much of Hampshire is hard. If your supply in Fleet is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Fitted furniture made to the eaves, so the low space behind the slope becomes storage
- An extractor fan ducted through the roof or a gable wall, with the duct insulated through cold spaces
- A check of the floor joists where a bath or large shower tray will sit
- A check of your hot-water system and of the pressure and flow you actually get at loft level
Decisions to make first
Where the shower goes
Under the ridge or in a dormer, where the full height is. A walk-in shower with a single panel is usually easier to fit to a roof line than a framed enclosure.
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Rules that apply in England
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.

