Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Hampshire · GU13

Walk-in showers in Fleet

Need a walk-in shower in Fleet? We plan it around your room and your budget, then do the whole job with one team and one contract.

£2,800–£6,700 inc VAT2–5 working daysFree home survey
Walk-in shower with a low tray, frameless panel and rainfall head, example for Fleet
Postcode districts
GU13, GU51, GU52
Nearby
Farnborough, Aldershot and Yateley
Guide price
£2,800–£6,700
Typical time on site
2–5 working days
Water
Hard across most of Hampshire
Survey
Free, at your home

What does a walk-in shower cost in Fleet?

Our guide price for a walk-in shower in Fleet is £2,800–£6,700 including VAT. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Frameless upgrade

£3,900–£6,200
  • Large tray and frameless screen

Tiled level floor

£4,500–£8,400
  • Level threshold

Guide prices for Fleet including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Fleet

We work right across Fleet — GU13, GU51 and GU52 — and in neighbouring Farnborough and Aldershot.

In Fleet, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Fleet bathroom has a bath that nobody uses, a walk-in shower in the same space is often a two or three day job. For a walk-in shower in Fleet, we check the water pressure first, so the head you choose will actually perform.

Water across much of Hampshire is hard. If your supply in Fleet is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A survey of the space, the waste position, water pressure and the hot-water system
  • Tanking to the shower walls, and to the floor where it is tiled
  • Wall tiling, with an optional recessed niche
  • A thermostatic valve with a riser rail, a fixed head or both

Decisions to make first

Tray length

Go long rather than wide. A 1400 to 1700 mm tray with a 900 to 1200 mm panel leaves a dry walkway; a 1200 mm tray works but gives less margin for spray.

Tray or tiled floor

A tray is quicker, costs less and has a small lip. A tiled floor with a linear drain sits level with the rest of the room and lets one tile run throughout.

Rules that apply in England

In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.

More about walk-in showers

Walk-in showers in Fleet: questions

What is the price of a walk-in shower in Fleet?

A walk-in shower in Fleet usually costs £2,800–£6,700 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in Fleet?

Water across much of Hampshire is hard. If your supply in Fleet is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a walk-in shower in Fleet?

Building control for Fleet is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a walk-in shower take?

Allow 2–5 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Fleet.

How big does a walk-in shower need to be?

A walk-in shower with no door works well at 1400 mm long or more, with the glass panel covering most of that length. At 1200 by 800 mm it is still usable, but spray is more likely to escape the open end. A width of 800 to 900 mm is enough for most people.

Walk-in showers in Fleet

Book a free home survey in Fleet. You get a measured layout and an itemised written price before anything is ordered.