Walk-in showers in Hampshire

What does a walk-in shower cost in Hampshire?

Our guide range in Hampshire is £2,800–£6,700 including VAT. Prices in Hampshire run at about 12% above the UK guide, based on South East England labour rates.

Typical

Tray and screen

£2,200–£4,500

Tiling to the shower walls

Frameless upgrade

£3,900–£6,200

Large tray and frameless screen

Tiled level floor

£4,500–£8,400

Level threshold

Guide prices for Hampshire including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Hampshire?

Supplies across most of Hampshire are hard. If your supply in Southampton is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Southampton shower enclosure has a leaking door seal or a cracked tray, a walk-in panel removes the door altogether.

What the job includes

An 8 mm or 10 mm toughened glass panel with a wall profile and support arm, or a frameless fixing
Silicone, a full-flow test for leaks and spray, and handover
A thermostatic valve with a riser rail, a fixed head or both
A survey of the space, the waste position, water pressure and the hot-water system
Tanking to the shower walls, and to the floor where it is tiled
Wall tiling, with an optional recessed niche

Decisions to make first

Glass thickness

8 mm toughened glass is standard; 10 mm feels heavier and more solid. An easy-clean coating keeps limescale off clear glass in hard-water areas.

Tray or tiled floor

A tray is quicker, costs less and has a small lip. A tiled floor with a linear drain sits level with the rest of the room and lets one tile run throughout.

Valve

An exposed bar valve with a riser rail is easy to fit and service. A concealed valve hides the pipework and suits a fixed overhead head.

Head

A large overhead head feels luxurious but needs good flow. A handset on a riser is easier for rinsing hair and cleaning the shower.

Rules that apply in England

Fitting a walk-in shower does not need planning permission. The light and fan above the shower are in zone 1 up to 2.25 m and must be at least IPX4, or IPX5 where water jets are used, with 30 mA RCD protection on every circuit under BS 7671. Under the water fittings rules, a shower pump may only be used on a gravity system with a cold tank, never on the mains, and the shower needs protection against water flowing back into the supply.

In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.

Walk-in showers in Hampshire: questions

How much does a walk-in shower cost in Hampshire?

A walk-in shower in Hampshire typically costs £2,800–£6,700 including VAT, based on South East England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Hampshire do you cover?

We cover the whole of Hampshire, including Southampton, Portsmouth, Basingstoke, Gosport, Waterlooville, Farnborough, Eastleigh and Winchester. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a walk-in shower take?

Most jobs take 2–5 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Hampshire?

What is the difference between a walk-in shower and a wet room?

A walk-in shower uses a tray, or a tanked shower area, with a glass panel, so only the shower area is waterproofed. In a wet room the whole floor is tanked and falls to a drain. A walk-in shower costs less and is quicker to fit; a wet room gives a fully level floor from wall to wall.