What does a walk-in shower cost in Berkshire?
Our guide range in Berkshire is £2,800–£6,700 including VAT. Prices in Berkshire run at about 12% above the UK guide, based on South East England labour rates.
Tray and screen
- Thermostatic mixer and riser rail
Frameless upgrade
- Large-format tiles, niche
Tiled level floor
- Floor former, tanking and linear drain
Guide prices for Berkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Berkshire?
Supplies across most of Berkshire are hard. If your supply in Reading is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Reading bathroom has a bath that nobody uses, a walk-in shower in the same space is often a two or three day job.
What the job includes
- Removal of the old bath or enclosure and making good to the walls and floor
- A survey of the space, the waste position, water pressure and the hot-water system
- Wall tiling, with an optional recessed niche
- A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor
- An 8 mm or 10 mm toughened glass panel with a wall profile and support arm, or a frameless fixing
- Tanking to the shower walls, and to the floor where it is tiled
Decisions to make first
Valve
An exposed bar valve with a riser rail is easy to fit and service. A concealed valve hides the pipework and suits a fixed overhead head.
Head
A large overhead head feels luxurious but needs good flow. A handset on a riser is easier for rinsing hair and cleaning the shower.
Glass thickness
8 mm toughened glass is standard; 10 mm feels heavier and more solid. An easy-clean coating keeps limescale off clear glass in hard-water areas.
Tray or tiled floor
A tray is quicker, costs less and has a small lip. A tiled floor with a linear drain sits level with the rest of the room and lets one tile run throughout.
Rules that apply in England
Fitting a walk-in shower does not need planning permission. The light and fan above the shower are in zone 1 up to 2.25 m and must be at least IPX4, or IPX5 where water jets are used, with 30 mA RCD protection on every circuit under BS 7671. Under the water fittings rules, a shower pump may only be used on a gravity system with a cold tank, never on the mains, and the shower needs protection against water flowing back into the supply.
In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.