- Postcode districts
- PE13
- Nearby
- March, King's Lynn and Spalding
- Guide price
- £500–£3,700
- Typical time on site
- half a day to 3 days
- Water
- Very hard across most of Cambridgeshire
- Survey
- Free, at your home
What does a new shower cost in Wisbech?
As a guide, budget £500 to £3,700 including VAT for a new shower in Wisbech; your written quote will pin it down. We adjust the national guide for East of England, where prices are typically about 6% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Wisbech including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Wisbech
We work right across Wisbech — PE13 — and in neighbouring March and King's Lynn.
In Wisbech, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For Wisbech homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If you want a shower in your Wisbech home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Most of Cambridgeshire has very hard water. If your supply in Wisbech is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A bath screen, tray or enclosure where the shower is new
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Electrical connection by a qualified electrician, tested and certified
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
