Shower installation in King's Lynn

Postcode districts: PE30
Nearby: Wisbech, March and Spalding
Guide price: £500–£3,700
Typical time on site: half a day to 3 days
Water: Very hard across most of Norfolk
Survey: Free, at your home

What does a new shower cost in King's Lynn?

For King's Lynn, our guide range for a new shower is £500 to £3,700 including VAT. Prices in East of England run at about 6% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£500–£1,050

Test and handover

Typical

New shower over bath

£850–£1,900

Thermostatic bar shower and riser

New shower with enclosure

£1,600–£3,700

Pipework and waste

Guide prices for King's Lynn including VAT. Your itemised written quote after the free survey is the price that counts.

Working in King's Lynn

As well as King's Lynn itself (PE30), we survey in Wisbech, March and Spalding.

In King's Lynn, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your King's Lynn bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If you are replacing a failed electric shower in King's Lynn, we check whether the existing cable and circuit suit the new unit.

Most of Norfolk has very hard water. If your supply in King's Lynn is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
A bath screen, tray or enclosure where the shower is new
Removal of the old shower, a full-flow test and a handover on isolating and descaling it

Decisions to make first

Exposed or concealed

An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in King's Lynn: questions

How much does a new shower cost in King's Lynn?

A new shower in King's Lynn usually costs £500–£3,700 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Is the water hard in King's Lynn?

Who handles building control for a new shower in King's Lynn?

Building control for King's Lynn is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in King's Lynn.

Can I fit a shower pump with a combi boiler?

No. A combi boiler takes its water from the mains, and connecting a pump directly to the mains supply is not allowed under the water fittings regulations. Shower pumps are only for gravity systems with a cold tank. If a combi shower is weak, the cause is usually the incoming flow, the boiler output or the head, not something a pump can fix.