Shower installation in Banbridge

Postcode districts: BT25, BT31, BT32
Nearby: Craigavon, Portadown and Newry
Guide price: £400–£3,100
Typical time on site: half a day to 3 days
Water: Soft across most of County Down
Survey: Free, at your home

What does a new shower cost in Banbridge?

Guide price in Banbridge: £400–£3,100 including VAT, depending on the room and what you choose. Labour costs in Northern Ireland put local prices at about 12% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£400–£900

Test and handover

Typical

New shower over bath

£700–£1,600

Thermostatic bar shower and riser

New shower with enclosure

£1,300–£3,100

Pipework and waste

Guide prices for Banbridge including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Banbridge

In Banbridge we cover BT25, BT31 and BT32; we also cover Craigavon, 7.9 miles away, and Portadown.

Being a smaller town does not change how we work in Banbridge: free survey, written quote, one team. For Banbridge homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If the shower in your Banbridge home swings between hot and cold, a thermostatic valve is usually the fix.

Water across much of County Down is soft. If that holds for your street in Banbridge, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Removal of the old shower, a full-flow test and a handover on isolating and descaling it

Decisions to make first

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in Northern Ireland

In Northern Ireland there is no Part P; electric shower circuits should be installed and certified to BS 7671. The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover pumps and backflow protection.

More about shower installation

Shower installation in Banbridge: questions

How much should I budget for a new shower in Banbridge?

A new shower in Banbridge usually costs £400–£3,100 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the home survey in Banbridge really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover BT25 in Banbridge?

Yes. We cover all of Banbridge, including BT25, BT31 and BT32, and nearby Craigavon, Portadown and Newry. Survey visits are free and arranged at a time that suits you.

Is the water hard in Banbridge?

Why does my shower keep going hot and cold?

Usually because it is a manual mixer without thermostatic control, so when someone runs a tap or flushes a toilet, the balance of hot and cold changes. A thermostatic valve corrects for this automatically. On an electric shower, scale build-up or a failing part can cause the same symptom.