- Postcode districts
- BT35
- Nearby
- Banbridge, Portadown and Armagh
- Guide price
- £400–£3,100
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of County Down
- Survey
- Free, at your home
What does a new shower cost in Newry?
For Newry, our guide range for a new shower is £400 to £3,100 including VAT. Labour costs in Northern Ireland put local prices at about 12% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Newry including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Newry
In Newry we cover BT35; we also cover Banbridge, 12.1 miles away, and Portadown.
In Newry, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. We test pressure and flow at Newry surveys before recommending a shower, so you know how it will perform before you buy. If the shower in your Newry home swings between hot and cold, a thermostatic valve is usually the fix.
Supplies across most of County Down are soft. If that holds for your street in Newry, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Electrical connection by a qualified electrician, tested and certified
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in Northern Ireland
In Northern Ireland there is no Part P; electric shower circuits should be installed and certified to BS 7671. The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover pumps and backflow protection.

