- Postcode districts
- BT63, BT64, BT65, BT66, BT67
- Nearby
- Portadown, Banbridge and Armagh
- Guide price
- £400–£3,100
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of County Armagh
- Survey
- Free, at your home
What does a new shower cost in Craigavon?
For Craigavon, our guide range for a new shower is £400 to £3,100 including VAT. Labour costs in Northern Ireland put local prices at about 12% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Craigavon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Craigavon
We cover every part of Craigavon, including BT63, BT64, BT65 and 2 more postcode districts, and nearby Portadown (2.8 miles) and Banbridge (7.9 miles).
In Craigavon, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Craigavon bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. For Craigavon homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Water across much of County Armagh is soft. If that holds for your street in Craigavon, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A bath screen, tray or enclosure where the shower is new
- Electrical connection by a qualified electrician, tested and certified
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Decisions to make first
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in Northern Ireland
In Northern Ireland there is no Part P; electric shower circuits should be installed and certified to BS 7671. The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover pumps and backflow protection.

