- Postcode districts
- BT63, BT64, BT65, BT66, BT67
- Nearby
- Portadown, Banbridge and Armagh
- Guide price
- £300–£1,300
- Typical time on site
- half a day to 1 day
- Water
- Soft across most of County Armagh
- Survey
- Free, at your home
What does a new vanity unit cost in Craigavon?
In Craigavon, a new vanity unit typically costs £300–£1,300 including VAT, based on Northern Ireland prices. Prices in Northern Ireland run at about 12% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Fit your unit
- Sealed and tested
Supply and fit
- Floor-standing or wall-hung unit
Double or bespoke
- Stone or solid-surface top
Guide prices for Craigavon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Craigavon
We cover every part of Craigavon, including BT63, BT64, BT65 and 2 more postcode districts, and nearby Portadown (2.8 miles) and Banbridge (7.9 miles).
In Craigavon, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. Wall-hung vanities in Craigavon homes are fixed to suit what the wall is built from, which we check at the survey. If your Craigavon water is hard, a tap with a removable aerator and a smooth one-piece basin top are easier to keep clean.
Supplies across most of County Armagh are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
- Removal of the old basin and pedestal, or old vanity, and taking it away
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
- Moving the waste and supply positions where the new unit needs them higher, lower or to one side
Decisions to make first
Wall-hung or floor-standing
Wall-hung units leave the floor clear and are easy to clean under, but need a strong wall. Floor-standing units hold more and suit weak or uneven walls.
Basin type
An inset or semi-recessed basin, a one-piece moulded top, or a countertop basin on a worktop. Countertop basins need a tall tap or a wall-mounted one.
Rules that apply in Northern Ireland
In Northern Ireland, the Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 cover the tap and supplies. A basin swap does not need building control approval.
