- Postcode districts
- EH11, EH13, EH14
- Nearby
- Currie, Balerno and Penicuik
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Edinburgh
- Survey
- Free, at your home
What does a new shower cost in Colinton?
In Colinton, a new shower typically costs £450–£3,400 including VAT, based on Scotland prices. Prices in Scotland run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Colinton including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Colinton
We work right across Colinton — EH11, EH13 and EH14 — and in neighbouring Currie and Balerno.
Colinton gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you want a shower in your Colinton home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. If you are replacing a failed electric shower in Colinton, we check whether the existing cable and circuit suit the new unit.
Supplies across most of Edinburgh are soft. If that holds for your street in Colinton, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Electrical connection by a qualified electrician, tested and certified
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- A check of your hot-water system, water pressure and flow rate
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Decisions to make first
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Rules that apply in Scotland
In Scotland there is no Part P, but a new shower circuit must still be designed, installed and certified to BS 7671. Water fittings, including pumps and backflow protection, are covered by the Scottish Water Byelaws 2014.

