- Postcode districts
- RM15, RM19, RM20
- Nearby
- Grays, Swanscombe and Hornchurch
- Guide price
- £500–£3,700
- Typical time on site
- half a day to 3 days
- Water
- Very hard across most of Essex
- Survey
- Free, at your home
What does a new shower cost in South Ockendon?
As a guide, budget £500 to £3,700 including VAT for a new shower in South Ockendon; your written quote will pin it down. Labour costs in East of England put local prices at about 6% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for South Ockendon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in South Ockendon
We work right across South Ockendon — RM15, RM19 and RM20 — and in neighbouring Grays and Swanscombe.
South Ockendon gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We test pressure and flow at South Ockendon surveys before recommending a shower, so you know how it will perform before you buy. For South Ockendon homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply.
Most of Essex has very hard water. If your supply in South Ockendon is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
