Shower installation in Hornchurch

Postcode districts: RM2, RM11, RM12
Nearby: Romford, Dagenham and Becontree
Guide price: £550–£4,400
Typical time on site: half a day to 3 days
Water: Very hard across most of Greater London
Survey: Free, at your home

What does a new shower cost in Hornchurch?

As a guide, budget £550 to £4,400 including VAT for a new shower in Hornchurch; your written quote will pin it down. Labour costs in London put local prices at about 25% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£550–£1,250

Existing supply and position

Typical

New shower over bath

£1,000–£2,200

Tiling the bath surround

New shower with enclosure

£1,900–£4,400

Tray, enclosure and valve

Guide prices for Hornchurch including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Hornchurch

We cover every part of Hornchurch, including RM2, RM11 and RM12, and nearby Romford (1.8 miles) and Dagenham (2.2 miles).

In Hornchurch, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. If you want a shower in your Hornchurch home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. If the shower in your Hornchurch home swings between hot and cold, a thermostatic valve is usually the fix.

Supplies across most of Greater London are very hard. If your supply in Hornchurch is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
A check of your hot-water system, water pressure and flow rate
Removal of the old shower, a full-flow test and a handover on isolating and descaling it
For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed

Decisions to make first

Digital shower

A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Hornchurch: questions

How much should I budget for a new shower in Hornchurch?

A new shower in Hornchurch usually costs £550–£4,400 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the water hard in Hornchurch?

Who handles building control for a new shower in Hornchurch?

Building control for Hornchurch is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Hornchurch.

Does an electric shower need its own circuit?

Almost always. An electric shower draws a large current, so it needs a dedicated circuit from the consumer unit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, with RCD protection. In England and Wales a new circuit is notifiable work. Swapping like for like onto an adequate existing circuit is simpler.