Shower installation in Dunfermline

Postcode districts: KY12
Nearby: Queensferry, Broxburn and Grangemouth
Guide price: £450–£3,400
Typical time on site: half a day to 3 days
Water: Soft across most of Fife
Survey: Free, at your home

What does a new shower cost in Dunfermline?

In Dunfermline, a new shower typically costs £450–£3,400 including VAT, based on Scotland prices. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£450–£950

Test and handover

Typical

New shower over bath

£750–£1,750

Thermostatic bar shower and riser

New shower with enclosure

£1,450–£3,400

Pipework and waste

Guide prices for Dunfermline including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Dunfermline

We work right across Dunfermline — KY12 — and in neighbouring Queensferry and Broxburn.

In a city the size of Dunfermline, parking and access for a skip are worth sorting before the start date — we will ask at the survey. For Dunfermline homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If the shower in your Dunfermline home swings between hot and cold, a thermostatic valve is usually the fix.

Most of Fife is supplied with soft water. If that holds for your street in Dunfermline, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
Electrical connection by a qualified electrician, tested and certified
Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area

Decisions to make first

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in Scotland

In Scotland there is no Part P, but a new shower circuit must still be designed, installed and certified to BS 7671. Water fittings, including pumps and backflow protection, are covered by the Scottish Water Byelaws 2014.

More about shower installation

Shower installation in Dunfermline: questions

How much should I budget for a new shower in Dunfermline?

A new shower in Dunfermline usually costs £450–£3,400 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover KY12 in Dunfermline?

Yes. We cover all of Dunfermline, including KY12, and nearby Queensferry, Broxburn and Grangemouth. Survey visits are free and arranged at a time that suits you.

Is the water hard in Dunfermline?

Will a new shower in Dunfermline need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

Which type of shower do I need?

The type depends on your hot-water system. With a combi boiler or unvented cylinder, a thermostatic mixer on mains pressure is usually right. With a cold tank and hot cylinder, a mixer runs by gravity, or a power shower or pump can boost it. If hot water is limited, an electric shower heats cold mains water as you use it. Our guide to choosing a shower goes further.