- Postcode districts
- G82, G83
- Nearby
- Dumbarton, Helensburgh and Erskine
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Greater Glasgow
- Survey
- Free, at your home
What does a new shower cost in Vale of Leven?
Guide price in Vale of Leven: £450–£3,400 including VAT, depending on the room and what you choose. Labour costs in Scotland put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Vale of Leven including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Vale of Leven
In Vale of Leven we cover G82 and G83; we also cover Dumbarton, 1.9 miles away, and Helensburgh.
Being a smaller town does not change how we work in Vale of Leven: free survey, written quote, one team. If you are replacing a failed electric shower in Vale of Leven, we check whether the existing cable and circuit suit the new unit. If you want a shower in your Vale of Leven home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Supplies across most of Greater Glasgow are soft. If that holds for your street in Vale of Leven, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Electrical connection by a qualified electrician, tested and certified
- A bath screen, tray or enclosure where the shower is new
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Rules that apply in Scotland
In Scotland there is no Part P, but a new shower circuit must still be designed, installed and certified to BS 7671. Water fittings, including pumps and backflow protection, are covered by the Scottish Water Byelaws 2014.
