Shower installation in Chiswick

Postcode districts: W3, W4, W6
Nearby: Acton, Shepherds Bush and Fulham
Guide price: £550–£4,400
Typical time on site: half a day to 3 days
Water: Very hard across most of Greater London
Survey: Free, at your home

What does a new shower cost in Chiswick?

As a guide, budget £550 to £4,400 including VAT for a new shower in Chiswick; your written quote will pin it down. Prices in London run at about 25% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£550–£1,250

Test and handover

Typical

New shower over bath

£1,000–£2,200

Thermostatic bar shower and riser

New shower with enclosure

£1,900–£4,400

Pipework and waste

Guide prices for Chiswick including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Chiswick

In Chiswick we cover W3, W4 and W6; we also cover Acton, 1.4 miles away, and Shepherds Bush.

In Chiswick, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. If you want a shower in your Chiswick home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. If your Chiswick bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.

Water across much of Greater London is very hard. If your supply in Chiswick is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
A check of your hot-water system, water pressure and flow rate
A bath screen, tray or enclosure where the shower is new

Decisions to make first

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Power shower

A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Chiswick: questions

How much does a new shower cost in Chiswick?

A new shower in Chiswick usually costs £550–£4,400 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Who handles building control for a new shower in Chiswick?

Building control for Chiswick is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new shower take?

Allow half a day to 3 days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Chiswick.

Is the home survey in Chiswick really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Which type of shower do I need?

The type depends on your hot-water system. With a combi boiler or unvented cylinder, a thermostatic mixer on mains pressure is usually right. With a cold tank and hot cylinder, a mixer runs by gravity, or a power shower or pump can boost it. If hot water is limited, an electric shower heats cold mains water as you use it. Our guide to choosing a shower goes further.