- Postcode districts
- M17, M32, M41
- Nearby
- Old Trafford, Urmston and Sale
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does a new shower cost in Stretford?
Our guide price for a new shower in Stretford is £400–£3,300 including VAT. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Stretford including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Stretford
We work right across Stretford — M17, M32 and M41 — and in neighbouring Old Trafford and Urmston.
In Stretford, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Stretford bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. We test pressure and flow at Stretford surveys before recommending a shower, so you know how it will perform before you buy.
Most of Greater Manchester is supplied with soft water. If that holds for your street in Stretford, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- A bath screen, tray or enclosure where the shower is new
- Electrical connection by a qualified electrician, tested and certified
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

