Shower installation in Hedge End

Postcode districts: SO30
Nearby: Eastleigh, Southampton and Hythe
Guide price: £500–£3,900
Typical time on site: half a day to 3 days
Water: Hard across most of Hampshire
Survey: Free, at your home

What does a new shower cost in Hedge End?

For Hedge End, our guide range for a new shower is £500 to £3,900 including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Shower swap

£500–£1,100

Existing supply and position

Typical

New shower over bath

£900–£2,000

Tiling the bath surround

New shower with enclosure

£1,700–£3,900

Tray, enclosure and valve

Guide prices for Hedge End including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Hedge End

In Hedge End we cover SO30; we also cover Eastleigh, 4.3 miles away, and Southampton.

Hedge End gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We test pressure and flow at Hedge End surveys before recommending a shower, so you know how it will perform before you buy. If the shower in your Hedge End home swings between hot and cold, a thermostatic valve is usually the fix.

Water across much of Hampshire is hard. If your supply in Hedge End is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A bath screen, tray or enclosure where the shower is new
New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
Supply and fitting of the shower valve or unit, riser rail, handset or fixed head

Decisions to make first

Thermostatic mixer

Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.

Electric shower

Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.

Rules that apply in England

In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.

More about shower installation

Shower installation in Hedge End: questions

How much should I budget for a new shower in Hedge End?

A new shower in Hedge End usually costs £500–£3,900 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Do you cover SO30 in Hedge End?

Yes. We cover all of Hedge End, including SO30, and nearby Eastleigh, Southampton and Hythe. Survey visits are free and arranged at a time that suits you.

Is the water hard in Hedge End?

Who handles building control for a new shower in Hedge End?

Building control for Hedge End is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can I fit a shower pump with a combi boiler?

No. A combi boiler takes its water from the mains, and connecting a pump directly to the mains supply is not allowed under the water fittings regulations. Shower pumps are only for gravity systems with a cold tank. If a combi shower is weak, the cause is usually the incoming flow, the boiler output or the head, not something a pump can fix.