- Postcode districts
- SO45
- Nearby
- Southampton, Totton and Hedge End
- Guide price
- £500–£3,900
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Hampshire
- Survey
- Free, at your home
What does a new shower cost in Hythe?
In Hythe, a new shower typically costs £500–£3,900 including VAT, based on South East England prices. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Hythe including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hythe
In Hythe we cover SO45; we also cover Southampton, 3 miles away, and Totton.
Hythe gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If you want a shower in your Hythe home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. If you are replacing a failed electric shower in Hythe, we check whether the existing cable and circuit suit the new unit.
Water across much of Hampshire is hard. If your supply in Hythe is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- A check of your hot-water system, water pressure and flow rate
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Head and handset
A handset on a riser rail is versatile and easy for rinsing; a fixed overhead head feels generous but needs strong flow behind it.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
