- Postcode districts
- HP4
- Nearby
- Chesham, Hemel Hempstead and Amersham on the Hill
- Guide price
- £500–£3,700
- Typical time on site
- half a day to 3 days
- Water
- Very hard across most of Hertfordshire
- Survey
- Free, at your home
What does a new shower cost in Berkhamsted?
For Berkhamsted, our guide range for a new shower is £500 to £3,700 including VAT. Labour costs in East of England put local prices at about 6% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Berkhamsted including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Berkhamsted
As well as Berkhamsted itself (HP4), we survey in Chesham, Hemel Hempstead and Amersham on the Hill.
Being a smaller town does not change how we work in Berkhamsted: free survey, written quote, one team. If you want a shower in your Berkhamsted home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit. We test pressure and flow at Berkhamsted surveys before recommending a shower, so you know how it will perform before you buy.
Water across much of Hertfordshire is very hard. If your supply in Berkhamsted is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Electrical connection by a qualified electrician, tested and certified
- A bath screen, tray or enclosure where the shower is new
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Decisions to make first
Power shower
A mixer with a built-in pump, for tank-fed systems only. It lifts a weak gravity shower but must never be connected to the mains.
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
