- Postcode districts
- G73
- Nearby
- Rutherglen, Blantyre and East Kilbride
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Soft across most of Lanarkshire
- Survey
- Free, at your home
What does a new shower cost in Cambuslang?
As a guide, budget £450 to £3,400 including VAT for a new shower in Cambuslang; your written quote will pin it down. We adjust the national guide for Scotland, where prices are typically about 4% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Cambuslang including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Cambuslang
As well as Cambuslang itself (G73), we survey in Rutherglen, Blantyre and East Kilbride.
Homes in and around Cambuslang vary, so we look at the floor, the walls and the water system before we price anything. If you are replacing a failed electric shower in Cambuslang, we check whether the existing cable and circuit suit the new unit. If your Cambuslang bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.
Most of Lanarkshire is supplied with soft water. If that holds for your street in Cambuslang, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
Decisions to make first
Thermostatic mixer
Blends hot and cold from your system and holds the temperature steady when someone runs a tap. The usual choice with a combi or an unvented cylinder.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in Scotland
In Scotland there is no Part P, but a new shower circuit must still be designed, installed and certified to BS 7671. Water fittings, including pumps and backflow protection, are covered by the Scottish Water Byelaws 2014.

