- Postcode districts
- LN6
- Nearby
- Gainsborough, Newark on Trent and Sleaford
- Guide price
- £450–£3,400
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Lincolnshire
- Survey
- Free, at your home
What does a new shower cost in Lincoln?
As a guide, budget £450 to £3,400 including VAT for a new shower in Lincoln; your written quote will pin it down. We adjust the national guide for East Midlands, where prices are typically about 4% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Lincoln including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Lincoln
We cover every part of Lincoln, including LN6, and nearby Gainsborough (14.4 miles) and Newark on Trent (16 miles).
In a city the size of Lincoln, parking and access for a skip are worth sorting before the start date — we will ask at the survey. For Lincoln homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If your Lincoln bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two.
Supplies across most of Lincolnshire are hard. If your supply in Lincoln is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- A bath screen, tray or enclosure where the shower is new
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Decisions to make first
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
