- Postcode districts
- HG4
- Nearby
- Harrogate, Northallerton and Guiseley
- Guide price
- £400–£3,300
- Typical time on site
- half a day to 3 days
- Water
- Moderately hard across most of North Yorkshire
- Survey
- Free, at your home
What does a new shower cost in Ripon?
Guide price in Ripon: £400–£3,300 including VAT, depending on the room and what you choose. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Existing supply and position
New shower over bath
- Tiling the bath surround
New shower with enclosure
- Tray, enclosure and valve
Guide prices for Ripon including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Ripon
We work right across Ripon — HG4 — and in neighbouring Harrogate and Northallerton.
Being a smaller town does not change how we work in Ripon: free survey, written quote, one team. For Ripon homes with a cold tank in the loft, we check the system before fitting anything, because a pump is only allowed on a gravity supply. If the shower in your Ripon home swings between hot and cold, a thermostatic valve is usually the fix.
Most of North Yorkshire has moderately hard water. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Ripon. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
