- Postcode districts
- TW20
- Nearby
- Staines, Chertsey and Ashford
- Guide price
- £500–£3,900
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of Surrey
- Survey
- Free, at your home
What does a new shower cost in Egham?
Guide price in Egham: £500–£3,900 including VAT, depending on the room and what you choose. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Like-for-like mixer or electric shower
New shower over bath
- Bath screen
New shower with enclosure
- Tiling to the enclosure
Guide prices for Egham including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Egham
We cover every part of Egham, including TW20, and nearby Staines (2 miles) and Chertsey (3.6 miles).
In Egham, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. We test pressure and flow at Egham surveys before recommending a shower, so you know how it will perform before you buy. If you want a shower in your Egham home that works when the boiler is off, an electric shower is worth considering, as long as the consumer unit can take the circuit.
Water across much of Surrey is hard. If your supply in Egham is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- New pipework and isolation valves, plus a pump only where the system is gravity-fed from a cold tank
- Removal of the old shower, a full-flow test and a handover on isolating and descaling it
- Electrical connection by a qualified electrician, tested and certified
- A check of your hot-water system, water pressure and flow rate
Decisions to make first
Digital shower
A wall panel sets the exact temperature and flow, while the mixing valve sits out of sight. It needs a power supply and suits a clean, concealed look.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
