What does a shower room cost in County Antrim?
Our guide range in County Antrim is £4,000–£7,900 including VAT. Prices in County Antrim run at about 12% below the UK guide, based on Northern Ireland labour rates.
Essential
- Basin and close-coupled WC
Signature
- Porcelain tiles throughout
Bespoke
- Tiled level-access floor
Guide prices for County Antrim including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in County Antrim?
Most of County Antrim is supplied with soft water. If that holds for your street in Belfast, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your second bathroom in Belfast is too narrow for a bath, a long walk-in tray can often fit along the same wall.
What the job includes
- A thermostatic shower valve, exposed or concealed, with a fixed head, a handset or both
- A low-profile tray or a tiled level floor, with the waste positioned for a good fall
- A basin and WC to suit the space, freestanding or set into a fitted furniture run
- Tanking to the shower area, then wall and floor tiling
- Recessed niches or shelving in the shower wall
- An enclosure, walk-in panel or frameless screen in toughened safety glass
Decisions to make first
Valve and heads
A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Glass
8 mm toughened glass is the usual standard for a walk-in panel. An easy-clean coating helps a great deal in hard-water areas.
Drain
A centre waste in a tray is the norm. A linear drain along one wall lets a tiled floor fall one way, so large tiles can run through.
Rules that apply in Northern Ireland
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In Northern Ireland, building control covers changes to drainage, structure and ventilation. Water fittings must meet the Water Supply (Water Fittings) Regulations (Northern Ireland) 2009, and wiring should follow BS 7671.

