What does a shower room cost in County Londonderry?
Our guide range in County Londonderry is £4,000–£7,900 including VAT. Prices in County Londonderry run at about 12% below the UK guide, based on Northern Ireland labour rates.
Essential
- Tray, enclosure and mixer shower
Signature
- Fitted vanity and concealed cistern
Bespoke
- Underfloor heating, mirror cabinet
Guide prices for County Londonderry including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in County Londonderry?
Water across much of County Londonderry is soft. If that holds for your street in Derry, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are converting a bathroom in Derry into a shower room, we price a tray and a tiled level floor side by side.
What the job includes
- Removal of the old bath and suite, waste removal, testing and handover
- Recessed niches or shelving in the shower wall
- A low-profile tray or a tiled level floor, with the waste positioned for a good fall
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
- A thermostatic shower valve, exposed or concealed, with a fixed head, a handset or both
Decisions to make first
Valve and heads
A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Storage
With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.
Tray size
A 1200 by 800 mm or 1400 by 900 mm tray with a single panel makes a comfortable walk-in. Go as long as the room allows; length does more than width to keep spray inside.
Rules that apply in Northern Ireland
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In Northern Ireland, building control covers changes to drainage, structure and ventilation. Water fittings must meet the Water Supply (Water Fittings) Regulations (Northern Ireland) 2009, and wiring should follow BS 7671.

