What does a shower room cost in County Down?
Our guide range in County Down is £4,000–£7,900 including VAT. Prices in County Down run at about 12% below the UK guide, based on Northern Ireland labour rates.
Essential
- Tiling to the shower area
Signature
- Large walk-in tray and frameless screen
Bespoke
- Concealed thermostatic or digital shower
Guide prices for County Down including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in County Down?
Water across much of County Down is soft. If that holds for your street in Bangor, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your second bathroom in Bangor is too narrow for a bath, a long walk-in tray can often fit along the same wall.
What the job includes
- Tanking to the shower area, then wall and floor tiling
- A basin and WC to suit the space, freestanding or set into a fitted furniture run
- Removal of the old bath and suite, waste removal, testing and handover
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- A survey of water pressure and flow, the hot-water system and the floor where the tray or former will sit
- A low-profile tray or a tiled level floor, with the waste positioned for a good fall
Decisions to make first
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Storage
With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.
Glass
8 mm toughened glass is the usual standard for a walk-in panel. An easy-clean coating helps a great deal in hard-water areas.
Tray size
A 1200 by 800 mm or 1400 by 900 mm tray with a single panel makes a comfortable walk-in. Go as long as the room allows; length does more than width to keep spray inside.
Rules that apply in Northern Ireland
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In Northern Ireland, building control covers changes to drainage, structure and ventilation. Water fittings must meet the Water Supply (Water Fittings) Regulations (Northern Ireland) 2009, and wiring should follow BS 7671.

