What does a shower room cost in Greater Manchester?
Our guide range in Greater Manchester is £4,200–£8,500 including VAT. Prices in Greater Manchester run at about 6% below the UK guide, based on North West England labour rates.
Essential
- Tray, enclosure and mixer shower
Signature
- Fitted vanity and concealed cistern
Bespoke
- Underfloor heating, mirror cabinet
Guide prices for Greater Manchester including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Greater Manchester?
- Manchester
- Oldham
- Wigan
- Bolton
- Stockport
- Salford
- Rochdale
- Sale
- Bury
- Altrincham
- Middleton
- Ashton-under-Lyne
- Leigh
- Stretford
- Urmston
- Chadderton
- Eccles
- Tyldesley
- Hyde
- Walkden
- Prestwich
- Radcliffe
- Cheadle Hulme
- Heywood
- Denton
- Stalybridge
- Ashton in Makerfield
- Westhoughton
- Farnworth
- Saddleworth
- Hindley
- Droylsden
- Whitefield
- Swinton
- Royton
- Atherton
- Old Trafford
- Dukinfield
- Failsworth
- Hazel Grove
- Irlam
- Horwich
- Bramhall
- Ramsbottom
- Bredbury
Most of Greater Manchester is supplied with soft water. If that holds for your street in Manchester, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your second bathroom in Manchester is too narrow for a bath, a long walk-in tray can often fit along the same wall.
What the job includes
- A thermostatic shower valve, exposed or concealed, with a fixed head, a handset or both
- Removal of the old bath and suite, waste removal, testing and handover
- A survey of water pressure and flow, the hot-water system and the floor where the tray or former will sit
- An enclosure, walk-in panel or frameless screen in toughened safety glass
- A low-profile tray or a tiled level floor, with the waste positioned for a good fall
- Extractor fan, lighting and towel rail wired by a qualified electrician, tested and certified
Decisions to make first
Valve and heads
A bar valve is simple and easy to service. A concealed valve with a ceiling head looks cleaner but needs good flow to perform.
Drain
A centre waste in a tray is the norm. A linear drain along one wall lets a tiled floor fall one way, so large tiles can run through.
Tray or level floor
A low-profile stone-resin tray is quicker to fit and costs less. A tiled level floor looks seamless but needs a former, tanking and more floor preparation.
Storage
With no bath, there is often space for a full-width vanity unit or a tall cupboard for towels.
Rules that apply in England
Turning a bathroom into a shower room does not need planning permission. The electrics must meet BS 7671: 30 mA RCD protection on every circuit, at least IPX4 fittings in zone 1 above the tray up to 2.25 m, or IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1. A shower pump can only be used on a gravity system with a cold tank, never connected directly to the mains.
In England, any change to the wiring in the shower room, or a new circuit for an electric shower, is notifiable under Part P. If you are replacing the fan, keep it at least as effective as the old one; Approved Document F gives 15 litres per second intermittent for a bathroom.

