Bathroom strip-out in Bedfordshire

What does a bathroom strip-out cost in Bedfordshire?

Our guide range in Bedfordshire is £650–£1,900 including VAT. Prices in Bedfordshire run at about 6% above the UK guide, based on East of England labour rates.

Typical

Strip-out only

£650–£1,050

Pipework capped safely

Strip-out and prep

£1,050–£1,900

Ready for fitting

Back to brick

£1,600–£3,200

Plaster and tiles removed

Guide prices for Bedfordshire including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Bedfordshire?

Supplies across most of Bedfordshire are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. Strip-outs in Luton include the waste going away with a licensed carrier, so nothing is left on the drive or the pavement.

What the job includes

Dust sheets and floor protection on the route out through the house
Waste loaded and taken away by a licensed waste carrier
Lights, fan, shaver socket and heated rail disconnected and made safe by a qualified electrician where needed
Removal of the bath or shower tray, enclosure, basin, WC, furniture and accessories
Wall and floor tiles taken off with as little damage as possible to sound plaster
Isolating the water and capping the supply to each fitting with a proper end, then checking for leaks

Decisions to make first

The floor

Old vinyl or tiles on a ply overlay can come up with the ply. Tiles bonded to a screed may need grinding back or overlaying instead.

Keep or lose the plaster

Tiles often come off leaving plaster that can be tiled again. If the plaster comes away with them, the wall is boarded or re-plastered.

Strip-out only or with prep

Strip-out only leaves walls and floors as found. With prep, walls are boarded or patched and the floor checked and overlaid, ready for fitting.

Timing

Strip out just before the fit rather than weeks ahead, so the house is without a bathroom for as short a time as possible.

Rules that apply in England

Homes built before 2000 can contain asbestos in textured ceiling coatings, old floor tiles, cistern lids and boxing panels, so suspect materials should be tested before strip-out if there is any doubt. Bathroom waste should be taken away by a licensed waste carrier. Disconnecting electrical items should leave every circuit safe and is a job for a qualified electrician, and any work near a boiler or gas pipe is for a Gas Safe registered engineer.

In England, stripping out a bathroom does not need planning permission or building regulations approval in itself. Building regulations come in with what follows, such as new drainage under Part H or new circuits under Part P.

Bathroom strip-out in Bedfordshire: questions

How much does a bathroom strip-out cost in Bedfordshire?

A bathroom strip-out in Bedfordshire typically costs £650–£1,900 including VAT, based on East of England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Bedfordshire do you cover?

We cover the whole of Bedfordshire, including Luton, Bedford, Dunstable, Leighton Buzzard, Ampthill, Kempston and Biggleswade. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a bathroom strip-out take?

Most jobs take 1–2 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Bedfordshire?

What happens to the water and toilet during a strip-out?

The bathroom supplies are isolated and capped so the rest of the house keeps its water, and the soil pipe is sealed to stop smells. If there are no isolation valves, the water may be off to the whole house for a short time. If the bathroom has your only WC, raise it at the survey so the toilet comes out as late as possible.