Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Cheshire · CH64

Underfloor heating in Ellesmere Port

We handle underfloor heating for homeowners and landlords in Ellesmere Port, with the survey, products, strip-out, trades and fitting under one contract.

£650–£2,400 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Ellesmere Port
Postcode districts
CH64, CH65, CH66
Nearby
Garston, Speke and Hunts Cross
Guide price
£650–£2,400
Typical time on site
1–2 working days (added to a fit)
Water
Moderately hard across most of Cheshire
Survey
Free, at your home

What does bathroom underfloor heating cost in Ellesmere Port?

As a guide, budget £650 to £2,400 including VAT for bathroom underfloor heating in Ellesmere Port; your written quote will pin it down. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,150–£2,100
  • Programmable smart thermostat

Wet system

£1,400–£2,800
  • Screed or low-profile boards

Guide prices for Ellesmere Port including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Ellesmere Port

We work right across Ellesmere Port — CH64, CH65 and CH66 — and in neighbouring Garston and Speke.

In Ellesmere Port, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. Whether your Ellesmere Port bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room. Where a Ellesmere Port home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Supplies across most of Cheshire are moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Bringing the system up to temperature gradually once the adhesive and grout have cured
  • Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
  • For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
  • A floor sensor set between the heating runs and wired back to the thermostat

Decisions to make first

Thermostat

A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.

Floor heating and towel rail

Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Ellesmere Port: questions

What is the price of bathroom underfloor heating in Ellesmere Port?

Bathroom underfloor heating in Ellesmere Port usually costs £650–£2,400 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the home survey in Ellesmere Port really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover CH64 in Ellesmere Port?

Yes. We cover all of Ellesmere Port, including CH64, CH65 and CH66, and nearby Garston, Speke and Hunts Cross. Survey visits are free and arranged at a time that suits you.

Is the water hard in Ellesmere Port?

Supplies across most of Cheshire are moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Is underfloor heating enough to heat a bathroom on its own?

In a well-insulated bathroom with most of the floor open, it often is. In a small room, the bath, WC and furniture cover much of the floor, so the heated area may be too small to be the only heat source. A heated towel rail alongside is the usual answer.

Underfloor heating in Ellesmere Port

Book a free home survey in Ellesmere Port. You get a measured layout and an itemised written price before anything is ordered.