What does a new vanity unit cost in Bristol?
Our guide range in Bristol is £350–£1,550 including VAT.
Fit your unit
- Fitting a unit you have bought
Supply and fit
- Basin, tap and waste
Double or bespoke
- Re-tiling behind
Guide prices for Bristol including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Bristol?
Supplies across most of Bristol are hard. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you have bought a vanity unit for your Bishopsworth bathroom, fit-only installation covers connecting the tap and waste and testing for leaks.
What the job includes
- A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
- A new tap, trap and the correct slotted or unslotted waste for the basin
- Testing for leaks and checking the trap holds its seal
- Moving the waste and supply positions where the new unit needs them higher, lower or to one side
- Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
Decisions to make first
Waste and overflow
A basin with an overflow takes a slotted waste; one without needs an unslotted waste, often a push-button 'click-clack' type.
Drawers or doors
Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.
One basin or two
Two basins help a busy household if the wall is long enough. In a smaller room, one basin with a longer top often works better.
Width
Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.
Rules that apply in England
Replacing a basin with a vanity unit does not need planning permission or building regulations approval. The new tap must meet the water fittings rules, including protection against backflow, and the waste should connect to the existing drainage through a proper trap. If the unit has a light, or a lit mirror goes above it, the electrical work must suit the zone it sits in under BS 7671 and be RCD protected.
In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.