What does a new vanity unit cost in Somerset?
Our guide range in Somerset is £350–£1,550 including VAT.
Fit your unit
- Sealed and tested
Supply and fit
- Floor-standing or wall-hung unit
Double or bespoke
- Stone or solid-surface top
Guide prices for Somerset including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Somerset?
Most of Somerset has hard water. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Bath water is hard, a tap with a removable aerator and a smooth one-piece basin top are easier to keep clean.
What the job includes
- A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
- Removal of the old basin and pedestal, or old vanity, and taking it away
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
- Moving the waste and supply positions where the new unit needs them higher, lower or to one side
- A new tap, trap and the correct slotted or unslotted waste for the basin
- Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
Decisions to make first
Wall-hung or floor-standing
Wall-hung units leave the floor clear and are easy to clean under, but need a strong wall. Floor-standing units hold more and suit weak or uneven walls.
Drawers or doors
Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.
One basin or two
Two basins help a busy household if the wall is long enough. In a smaller room, one basin with a longer top often works better.
Waste and overflow
A basin with an overflow takes a slotted waste; one without needs an unslotted waste, often a push-button 'click-clack' type.
Rules that apply in England
Replacing a basin with a vanity unit does not need planning permission or building regulations approval. The new tap must meet the water fittings rules, including protection against backflow, and the waste should connect to the existing drainage through a proper trap. If the unit has a light, or a lit mirror goes above it, the electrical work must suit the zone it sits in under BS 7671 and be RCD protected.
In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.