Walk-in showers in Bexley

Postcode districts: DA5, DA6, DA14, DA15, DA16
Nearby: Dartford, Swanley and Barking
Guide price: £3,100–£7,500
Typical time on site: 2–5 working days
Water: Very hard across most of Greater London
Survey: Free, at your home

What does a walk-in shower cost in Bexley?

For Bexley, our guide range for a walk-in shower is £3,100 to £7,500 including VAT. We adjust the national guide for London, where prices are typically about 25% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Tray and screen

£2,500–£5,000

Low-profile tray and 8 mm glass panel

Frameless upgrade

£4,400–£6,900

Concealed thermostatic valve

Tiled level floor

£5,000–£9,400

Floor and wall tiling

Guide prices for Bexley including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Bexley

We cover every part of Bexley, including DA5, DA6, DA14 and 2 more postcode districts, and nearby Dartford (2.8 miles) and Swanley (3.2 miles).

London homes in Bexley often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. If you are planning ahead in Bexley for easier access, a low-profile walk-in tray gives most of the benefit without a full wet room. We measure walk-in showers in Bexley so the tray and panel are sized together, which is what keeps the spray in.

Water across much of Greater London is very hard. If your supply in Bexley is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Silicone, a full-flow test for leaks and spray, and handover
Wall tiling, with an optional recessed niche
A thermostatic valve with a riser rail, a fixed head or both
A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor

Decisions to make first

Tray length

Go long rather than wide. A 1400 to 1700 mm tray with a 900 to 1200 mm panel leaves a dry walkway; a 1200 mm tray works but gives less margin for spray.

Glass thickness

8 mm toughened glass is standard; 10 mm feels heavier and more solid. An easy-clean coating keeps limescale off clear glass in hard-water areas.

Rules that apply in England

In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.

More about walk-in showers

Walk-in showers in Bexley: questions

How much should I budget for a walk-in shower in Bexley?

A walk-in shower in Bexley usually costs £3,100–£7,500 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the water hard in Bexley?

Who handles building control for a walk-in shower in Bexley?

Building control for Bexley is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a walk-in shower take?

Allow 2–5 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Bexley.

Can a walk-in shower replace a bath?

Yes. A standard bath is about 1700 by 700 mm, so a 1700 mm tray fits the same space and can often use the existing waste position. It is one of the simplest ways to get a walk-in shower; our bath to shower conversions page covers that job in detail.