- Postcode districts
- TN23, TN24
- Nearby
- Faversham, Canterbury and Folkestone
- Guide price
- £2,200–£5,600
- Typical time on site
- 2–6 working days
- Water
- Very hard across most of Kent
- Survey
- Free, at your home
What does a bath to shower conversion cost in Ashford?
As a guide, budget £2,200 to £5,600 including VAT for a bath to shower conversion in Ashford; your written quote will pin it down. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Tray and enclosure
- Bath removed, tray in its place
Walk-in shower
- Concealed valve, rainfall head
Level-access floor
- Grab rails and seat options
Guide prices for Ashford including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Ashford
As well as Ashford itself (TN23 and TN24), we survey in Faversham, Canterbury and Folkestone.
In Ashford, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For Ashford houses with only one bath, we talk through whether to keep it before you decide. If you are applying for a grant towards a bath to shower conversion in Ashford, we provide the itemised written quote the council will ask for.
Water across much of Kent is very hard. If your supply in Ashford is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Silicone, a full-flow test and a tidy finish where the new tiling meets the old
- Repair or replacement of floorboards where the bath has left them soft or damaged
- A survey of the bath space, the waste position, the floor and your water system
- A glass enclosure, walk-in panel or frameless screen
Decisions to make first
Mixer or electric shower
A thermostatic mixer draws on your hot-water system. An electric shower heats cold mains water as it flows and needs its own circuit.
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
Rules that apply in England
In England, adding an electric shower usually means a new circuit, which is notifiable under Part P, as is any change to the wiring in the bathroom. Where the conversion is an adaptation for a disabled person, a Disabled Facilities Grant of up to £30,000 may help, but the council must approve it before work starts.

