What does bathroom plumbing work cost in West Yorkshire?
Our guide range in West Yorkshire is £550–£3,700 including VAT. Prices in West Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.
Like-for-like
- New suite in the same positions
Partial re-route
- New hot and cold runs
New layout
- Pump or pressure upgrade
Guide prices for West Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in West Yorkshire?
- Leeds
- Bradford
- Huddersfield
- Wakefield
- Halifax
- Dewsbury
- Morley
- Keighley
- Castleford
- Pontefract
- Batley
- Yeadon
- Brighouse
- Shipley
- Cleckheaton
- Pudsey
- Lofthouse
- Ossett
- Guiseley
- Liversedge
- Horsforth
- South Elmsall
- Mirfield
- Heckmondwike
- Bingley
- Kippax
- Baildon
- Elland
Supplies across most of West Yorkshire are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Leeds home has a gravity system with a loft tank, we check the head of water before recommending a shower or a pump.
What the job includes
- The WC connected to the soil stack, or a new branch where the WC is moving
- Isolation valves on every fitting, so taps, cisterns and valves can be serviced without draining the system
- Draining down and isolating supplies, with the rest of the house back on water as soon as possible
- Shower pumps on gravity systems, and macerators or pumped wastes where gravity drainage cannot reach
- New hot and cold pipework in copper or plastic, properly clipped, and insulated where it runs through cold spaces
- Basin, bath and shower wastes sized and laid to a steady fall, with traps that hold their water seal
Decisions to make first
Shower supply
Combi boilers and unvented cylinders give mains pressure. A gravity system with a cold tank may need a pump, but a pump must never be connected to the mains.
Pipe routes
Drilling through the middle of joists, rather than notching the tops, keeps the floor strong. Routes are planned with the joist direction in mind.
Gravity or pumped waste
Gravity drainage is always the first choice. A shower waste pump or macerator solves a run that cannot fall, but adds noise, a power supply and servicing.
Copper or plastic
Copper is rigid and suits pipes on show or near the boiler. Plastic is quicker under floors and inside walls, and long runs need fewer joints.
Rules that apply in England
New WCs, taps, showers and valves must meet the water fittings rules where you live: a maximum 6-litre flush for new WCs, backflow protection, and no pump connected directly to the mains supply, because shower pumps are only for gravity systems with a cold tank. Unvented hot-water cylinders must be installed by a G3-qualified installer, and any work on a gas boiler by a Gas Safe registered engineer.
In England, the Water Supply (Water Fittings) Regulations 1999 apply. New drainage or a new connection to the soil stack can be building regulations work under Part H, and a macerator or pumped WC is acceptable only where there is also a WC on gravity drainage elsewhere in the home.