- Postcode districts
- S25, S66
- Nearby
- Dinnington, Conisbrough and Rotherham
- Guide price
- £4,200–£8,400
- Typical time on site
- 4–8 working days
- Water
- Moderately hard across most of South Yorkshire
- Survey
- Free, at your home
What does an en-suite cost in Maltby?
In Maltby, an en-suite typically costs £4,200–£8,400 including VAT, based on Yorkshire and the Humber prices. We adjust the national guide for Yorkshire and the Humber, where prices are typically about 7% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting and extractor fan
Upgrade
- Walk-in shower or larger tray
New en-suite
- New stud walls, drainage and pump if needed
Guide prices for Maltby including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Maltby
We cover every part of Maltby, including S25 and S66, and nearby Dinnington (3.5 miles) and Conisbrough (4.7 miles).
Being a smaller town does not change how we work in Maltby: free survey, written quote, one team. If your Maltby en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit. For an en-suite in Maltby, the first question at the survey is always where the waste can reach the soil stack.
Water across much of South Yorkshire is moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Maltby. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
Decisions to make first
Door type
An outward-opening door frees floor space inside. A sliding pocket door saves space on both sides but needs a stud wall long enough to take the cassette.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

