What does a family bathroom cost in Bristol?
Our guide range in Bristol is £6,100–£11,250 including VAT.
Essential
- White suite, chrome taps
Signature
- Porcelain tiles, heated towel rail
Bespoke
- Separate bath and shower
Guide prices for Bristol including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Bristol?
Most of Bristol has hard water. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you have young children at home in Bishopsworth, we can talk through a bath that is easy to lean over, a slip-resistant floor and high-level storage.
What the job includes
- A free home survey covering room sizes, the soil stack position, your boiler or cylinder type and water pressure
- Wall and floor tiling, with a floor finish chosen to grip under wet feet
- Moisture-resistant boarding and tanking around the bath and shower before any tiling
- Final silicone, a test of every tap and waste, and a clean handover
- Supply of the bath, basin, WC, brassware, shower, screen, tiles and heated towel rail
- Strip-out of the old suite and tiles, with the waste taken away by a licensed waste carrier
Decisions to make first
Bath shape
A standard 1700 mm bath fits most rooms. A shower bath widens at one end to give more standing room under the shower; a double-ended bath puts the waste in the middle so two children can share without one sitting on the plug.
Bath material
Reinforced acrylic is warm to the touch and light on the floor. Steel enamel is harder-wearing and feels more solid, but it draws heat from the water faster.
Storage
A vanity under the basin, a tall unit or a mirror cabinet. High-level or lockable storage keeps medicines and cleaning products out of reach of small children.
Floor
Matt or textured porcelain is the hardest-wearing option. Luxury vinyl tile (LVT) is warmer, quieter and cheaper to lay. Avoid polished tiles where children climb out of the bath.
Rules that apply in England
Refitting a family bathroom in the same room does not need planning permission. The electrics must meet BS 7671, with 30 mA RCD protection on every circuit in the room and at least IPX4 fittings in the zone above the bath, up to 2.25 m. The water fittings rules in each nation limit a new WC to a 6-litre flush and require protection against dirty water flowing back into the supply.
In England, any new circuit, or any change to the wiring in a room with a bath or shower, is notifiable under Part P. Part G limits the hot water at a new bath to 48 °C only in a new dwelling or one created by change of use; it does not apply to a replacement bath in an existing house, but a thermostatic valve is a sensible choice where children bathe.