What does fitted bathroom furniture cost in the East Riding of Yorkshire?
Our guide range in the East Riding of Yorkshire is £1,400–£5,600 including VAT. Prices in the East Riding of Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.
Compact run
- Laminate worktop
Full fitted run
- Fillers scribed to the walls
Wall-to-wall
- Floor-to-ceiling storage
Guide prices for East Riding of Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in the East Riding of Yorkshire?
Supplies across most of the East Riding of Yorkshire are hard. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier. We measure Kingston upon Hull bathrooms wall by wall before ordering, so the run is made for your room.
What the job includes
- Fillers and end panels scribed to the walls, and the worktop sealed with silicone
- Supply of carcasses, doors, plinths, fillers and end panels in your chosen finish
- A concealed cistern or cistern frame, with an isolation valve you can reach through the flush plate or a panel
- A worktop cut to length, with basin and tap cut-outs and sealed edges
- Basin, tap and waste connected, and the WC pan fixed and joined to the soil pipe
- Removal of the old basin, WC or cabinets, with redundant supplies capped
Decisions to make first
Door style
Slab doors are the easiest to wipe down. Shaker doors look traditional but have grooves that collect dust. Handleless push-to-open doors suit a plain, modern room.
Cistern type
A back-to-wall pan can use a cistern that sits inside the WC unit, which is simple to service. A wall-hung WC needs a load-bearing frame built in behind the run.
Lighting in the run
Plinth lights and an illuminated mirror cabinet must be planned at first fix, because the cables run inside the furniture and need RCD protection.
Unit depth
Slimline units are shallower and suit narrow rooms; standard-depth units hold more and give a wider worktop over the cistern.
Rules that apply in England
Fitted furniture itself is not controlled by building regulations, but what goes into it is. A new WC must meet the water fittings rules, with a maximum 6-litre flush and backflow protection. Illuminated mirrors, cabinet lights and shaver points must suit the bathroom zones under BS 7671, on circuits with 30 mA RCD protection, and apart from shaver supply units, sockets must be at least 3 m from the edge of zone 1.
In England, wiring a lit mirror or plinth lights means altering a circuit in a room with a bath or shower, which is notifiable under Part P. The Water Supply (Water Fittings) Regulations 1999 cover the new WC and basin taps.