Fitted bathroom furniture in West Yorkshire

What does fitted bathroom furniture cost in West Yorkshire?

Our guide range in West Yorkshire is £1,400–£5,600 including VAT. Prices in West Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.

Guide prices for West Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in West Yorkshire?

• Leeds
• Bradford
• Huddersfield
• Wakefield
• Halifax
• Dewsbury
• Morley
• Keighley
• Castleford
• Pontefract
• Batley
• Yeadon
• Brighouse
• Shipley
• Cleckheaton
• Pudsey
• Lofthouse
• Ossett
• Guiseley
• Liversedge
• Horsforth
• South Elmsall
• Mirfield
• Heckmondwike
• Bingley
• Kippax
• Baildon
• Elland

Most of West Yorkshire is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are in Leeds and short of storage, a tall unit at the end of the run holds what would otherwise sit on the floor.

What the job includes

• Supply of carcasses, doors, plinths, fillers and end panels in your chosen finish
• A worktop cut to length, with basin and tap cut-outs and sealed edges
• A concealed cistern or cistern frame, with an isolation valve you can reach through the flush plate or a panel
• Measuring every wall for length, height and how far it is out of square
• Fillers and end panels scribed to the walls, and the worktop sealed with silicone
• Basin, tap and waste connected, and the WC pan fixed and joined to the soil pipe

Decisions to make first

Door style

Slab doors are the easiest to wipe down. Shaker doors look traditional but have grooves that collect dust. Handleless push-to-open doors suit a plain, modern room.

Tall storage

A tall unit at the end of the run takes towels and cleaning products off the floor. Check it clears the door, window and towel rail.

Lighting in the run

Plinth lights and an illuminated mirror cabinet must be planned at first fix, because the cables run inside the furniture and need RCD protection.

Unit depth

Slimline units are shallower and suit narrow rooms; standard-depth units hold more and give a wider worktop over the cistern.

Rules that apply in England

Fitted furniture itself is not controlled by building regulations, but what goes into it is. A new WC must meet the water fittings rules, with a maximum 6-litre flush and backflow protection. Illuminated mirrors, cabinet lights and shaver points must suit the bathroom zones under BS 7671, on circuits with 30 mA RCD protection, and apart from shaver supply units, sockets must be at least 3 m from the edge of zone 1.

In England, wiring a lit mirror or plinth lights means altering a circuit in a room with a bath or shower, which is notifiable under Part P. The Water Supply (Water Fittings) Regulations 1999 cover the new WC and basin taps.