Fitted bathroom furniture in South Yorkshire

What does fitted bathroom furniture cost in South Yorkshire?

Our guide range in South Yorkshire is £1,400–£5,600 including VAT. Prices in South Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.

Guide prices for South Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in South Yorkshire?

• Sheffield
• Rotherham
• Doncaster
• Barnsley
• Bentley
• Chapeltown
• Darton
• Dinnington
• Adwick le Street
• Rawmarsh
• Maltby
• Thorne
• Wath upon Dearne
• Conisbrough
• Hoyland Nether
• Wombwell
• Mexborough

Supplies across most of South Yorkshire are moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier. We measure Sheffield bathrooms wall by wall before ordering, so the run is made for your room.

What the job includes

• Tall units fixed to the wall, doors adjusted and soft-close hinges set
• Fillers and end panels scribed to the walls, and the worktop sealed with silicone
• A concealed cistern or cistern frame, with an isolation valve you can reach through the flush plate or a panel
• Removal of the old basin, WC or cabinets, with redundant supplies capped
• A worktop cut to length, with basin and tap cut-outs and sealed edges
• Measuring every wall for length, height and how far it is out of square

Decisions to make first

Cistern type

A back-to-wall pan can use a cistern that sits inside the WC unit, which is simple to service. A wall-hung WC needs a load-bearing frame built in behind the run.

Door style

Slab doors are the easiest to wipe down. Shaker doors look traditional but have grooves that collect dust. Handleless push-to-open doors suit a plain, modern room.

Unit depth

Slimline units are shallower and suit narrow rooms; standard-depth units hold more and give a wider worktop over the cistern.

Lighting in the run

Plinth lights and an illuminated mirror cabinet must be planned at first fix, because the cables run inside the furniture and need RCD protection.

Rules that apply in England

Fitted furniture itself is not controlled by building regulations, but what goes into it is. A new WC must meet the water fittings rules, with a maximum 6-litre flush and backflow protection. Illuminated mirrors, cabinet lights and shaver points must suit the bathroom zones under BS 7671, on circuits with 30 mA RCD protection, and apart from shaver supply units, sockets must be at least 3 m from the edge of zone 1.

In England, wiring a lit mirror or plinth lights means altering a circuit in a room with a bath or shower, which is notifiable under Part P. The Water Supply (Water Fittings) Regulations 1999 cover the new WC and basin taps.