What does fitted bathroom furniture cost in North Yorkshire?
Our guide range in North Yorkshire is £1,400–£5,600 including VAT. Prices in North Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.
Compact run
- Soft-close doors
Full fitted run
- Vanity, WC unit and tall storage
Wall-to-wall
- Mirror cabinets and lighting
Guide prices for North Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in North Yorkshire?
Water across much of North Yorkshire is moderately hard. Taps and wastes will need an occasional descale, and chrome or brushed finishes are easier to keep clean than polished brass. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your York home has uneven walls, fillers and end panels are scribed to them on site rather than left with gaps.
What the job includes
- A worktop cut to length, with basin and tap cut-outs and sealed edges
- Tall units fixed to the wall, doors adjusted and soft-close hinges set
- Supply of carcasses, doors, plinths, fillers and end panels in your chosen finish
- Fillers and end panels scribed to the walls, and the worktop sealed with silicone
- Removal of the old basin, WC or cabinets, with redundant supplies capped
- Basin, tap and waste connected, and the WC pan fixed and joined to the soil pipe
Decisions to make first
Door style
Slab doors are the easiest to wipe down. Shaker doors look traditional but have grooves that collect dust. Handleless push-to-open doors suit a plain, modern room.
Carcass board
Moisture-resistant board with sealed edges is the minimum. Some ranges use a PVC-based or similar carcass that copes better with splashes and leaks.
Lighting in the run
Plinth lights and an illuminated mirror cabinet must be planned at first fix, because the cables run inside the furniture and need RCD protection.
Unit depth
Slimline units are shallower and suit narrow rooms; standard-depth units hold more and give a wider worktop over the cistern.
Rules that apply in England
Fitted furniture itself is not controlled by building regulations, but what goes into it is. A new WC must meet the water fittings rules, with a maximum 6-litre flush and backflow protection. Illuminated mirrors, cabinet lights and shaver points must suit the bathroom zones under BS 7671, on circuits with 30 mA RCD protection, and apart from shaver supply units, sockets must be at least 3 m from the edge of zone 1.
In England, wiring a lit mirror or plinth lights means altering a circuit in a room with a bath or shower, which is notifiable under Part P. The Water Supply (Water Fittings) Regulations 1999 cover the new WC and basin taps.