What does a loft bathroom cost in South Yorkshire?
Our guide range in South Yorkshire is £6,000–£12,000 including VAT. Prices in South Yorkshire run at about 7% below the UK guide, based on Yorkshire and the Humber labour rates.
Refit
- Existing loft shower room
Signature
- Fitted furniture to the eaves
New loft bathroom
- Ventilation and electrics to regulations
Guide prices for South Yorkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in South Yorkshire?
- Sheffield
- Rotherham
- Doncaster
- Barnsley
- Bentley
- Chapeltown
- Darton
- Dinnington
- Adwick le Street
- Rawmarsh
- Maltby
- Thorne
- Wath upon Dearne
- Conisbrough
- Hoyland Nether
- Wombwell
- Mexborough
Water across much of South Yorkshire is moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Sheffield. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Sheffield loft conversion has a bedroom but no bathroom, the survey starts with where the soil stack runs and how much headroom you have.
What the job includes
- An extractor fan ducted through the roof or a gable wall, with the duct insulated through cold spaces
- A drainage route from the loft to the soil stack with enough fall, or a pumped waste or macerator where the rules allow it
- Fitted furniture made to the eaves, so the low space behind the slope becomes storage
- A check of your hot-water system and of the pressure and flow you actually get at loft level
- A shower pump on a gravity system, an electric shower, or advice on moving to mains pressure, depending on your system
- Electrics by a qualified electrician, tested and certified, then tiling, testing and handover
Decisions to make first
Roof window
A roof window over the bath or shower brings daylight and fresh air, but plan the blind for privacy and expect condensation on cold glass.
Bath or no bath
A bath under the slope makes good use of low space, but the floor has to carry it when it is full of water and someone is in it.
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Gravity or pumped waste
Gravity is silent and maintenance-free. A pumped waste or macerator lets fittings sit away from the stack, provided the house has a WC on gravity drainage elsewhere.
Rules that apply in England
A bathroom inside an existing loft room does not usually need planning permission, but forming one is normally building-regulations work because of the new drainage, extract ventilation and electrics. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. Under the water fittings rules, a shower pump must never be connected directly to the mains supply.
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.