- Postcode districts
- PO30, PO32, PO33
- Nearby
- Cowes, Ryde and Sandown
- Guide price
- £500–£3,900
- Typical time on site
- half a day to 3 days
- Water
- Hard across most of the Isle of Wight
- Survey
- Free, dates by arrangement
What does a new shower cost in Newport?
In Newport, a new shower typically costs £500–£3,900 including VAT, based on South East England prices. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. Travel and delivery to islands and remote areas are priced on your quote. The figure depends on the size of the room, whether anything moves, and the products you pick.
Shower swap
- Test and handover
New shower over bath
- Thermostatic bar shower and riser
New shower with enclosure
- Pipework and waste
Guide prices for Newport including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Newport
We work right across Newport — PO30, PO32 and PO33 — and in neighbouring Cowes and Ryde. Because Newport is further afield, we arrange survey visits in batches; tell us your timescale and we will confirm a date before you commit to anything.
Newport gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Newport bath has no shower over it, a thermostatic bar shower, screen and tiling can usually be added in a day or two. If the shower in your Newport home swings between hot and cold, a thermostatic valve is usually the fix.
Most of the Isle of Wight has hard water. If your supply in Newport is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of your hot-water system, water pressure and flow rate
- For an electric shower, a check of the consumer unit and whether a new dedicated circuit is needed
- Supply and fitting of the shower valve or unit, riser rail, handset or fixed head
- Tiling or re-tiling around the shower, with tanking behind new tiles in the wet area
Decisions to make first
Exposed or concealed
An exposed bar valve fixes onto the tiles and is easy to service. A concealed valve sits in the wall for a cleaner look but needs careful setting-out and a plan for access.
Electric shower
Heats cold mains water as it flows, so it works without stored hot water. Higher kW units give more flow; 8.5 to 10.5 kW models need a dedicated circuit, often 40 to 45 amps.
Rules that apply in England
In England, an electric shower usually needs its own dedicated circuit, often 40 to 45 amps for an 8.5 to 10.5 kW unit, and a new circuit is notifiable under Part P. The Part G limit of 48 °C applies to a new bath in a new dwelling or one created by change of use, not to a shower, but a thermostatic valve gives similar protection. An unvented cylinder fitted to improve the shower must be installed by a G3-qualified installer.
