Underfloor heating in Stroud

Postcode districts: GL5, GL6, GL10
Nearby: Gloucester, Cirencester and Cheltenham
Guide price: £700–£2,600
Typical time on site: 1–2 working days (added to a fit)
Water: Hard across most of Gloucestershire
Survey: Free, at your home

What does bathroom underfloor heating cost in Stroud?

In Stroud, bathroom underfloor heating typically costs £700–£2,600 including VAT, based on South West England prices. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£700–£1,550

Thermostat and RCD-protected supply

Electric, larger room

£1,200–£2,200

Whole floor coverage

Wet system

£1,550–£3,100

Manifold or single-zone kit

Guide prices for Stroud including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Stroud

As well as Stroud itself (GL5, GL6 and GL10), we survey in Gloucester, Cirencester and Cheltenham.

In Stroud, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For Stroud homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit. If your Stroud home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below.

Most of Gloucestershire has hard water. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A floor sensor set between the heating runs and wired back to the thermostat
Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit

Decisions to make first

Floor heating and towel rail

Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Stroud: questions

How much does bathroom underfloor heating cost in Stroud?

Bathroom underfloor heating in Stroud usually costs £700–£2,600 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in Stroud?

Who handles building control for bathroom underfloor heating in Stroud?

Building control for Stroud is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does bathroom underfloor heating take?

Allow 1–2 working days (added to a fit) on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Stroud.

Does underfloor heating raise the floor height?

Yes, a little. An electric mat on an insulation board usually adds roughly 10 mm before the adhesive and tile, which matters at the door threshold. Wet systems in low-profile boards add more, and screeded systems more again.