Walk-in showers in Argyll and Bute

What does a walk-in shower cost in Argyll and Bute?

Our guide range in Argyll and Bute is £2,400–£5,800 including VAT. Prices in Argyll and Bute run at about 4% below the UK guide, based on Scotland labour rates. Travel and delivery to islands and remote areas are priced on your quote.

Typical

Tray and screen

£1,900–£3,800

Tiling to the shower walls

Frameless upgrade

£3,400–£5,300

Large tray and frameless screen

Tiled level floor

£3,800–£7,200

Level threshold

Guide prices for Argyll & Bute including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Argyll and Bute?

Supplies across most of Argyll and Bute are soft. If that holds for your street in Helensburgh, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. We measure walk-in showers in Helensburgh so the tray and panel are sized together, which is what keeps the spray in.

What the job includes

Silicone, a full-flow test for leaks and spray, and handover
A thermostatic valve with a riser rail, a fixed head or both
A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor
A survey of the space, the waste position, water pressure and the hot-water system
Wall tiling, with an optional recessed niche
Removal of the old bath or enclosure and making good to the walls and floor

Decisions to make first

Tray length

Go long rather than wide. A 1400 to 1700 mm tray with a 900 to 1200 mm panel leaves a dry walkway; a 1200 mm tray works but gives less margin for spray.

Niche

A recessed shelf in the back wall keeps bottles off the tray. It has to be planned at first fix and tanked like the rest of the wall.

Glass thickness

8 mm toughened glass is standard; 10 mm feels heavier and more solid. An easy-clean coating keeps limescale off clear glass in hard-water areas.

Head

A large overhead head feels luxurious but needs good flow. A handset on a riser is easier for rinsing hair and cleaning the shower.

Rules that apply in Scotland

Fitting a walk-in shower does not need planning permission. The light and fan above the shower are in zone 1 up to 2.25 m and must be at least IPX4, or IPX5 where water jets are used, with 30 mA RCD protection on every circuit under BS 7671. Under the water fittings rules, a shower pump may only be used on a gravity system with a cold tank, never on the mains, and the shower needs protection against water flowing back into the supply.

In Scotland, a straight swap from a bath or enclosure to a walk-in shower does not normally need a building warrant, though altering the drainage may. Water fittings must meet the Scottish Water Byelaws 2014.

Walk-in showers in Argyll and Bute: questions

How much does a walk-in shower cost in Argyll and Bute?

A walk-in shower in Argyll and Bute typically costs £2,400–£5,800 including VAT, based on Scotland prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Argyll and Bute do you cover?

We cover the whole of Argyll & Bute, including Helensburgh, Dunoon, Oban and Rothesay. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a walk-in shower take?

Most jobs take 2–5 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Argyll and Bute?

How big does a walk-in shower need to be?

A walk-in shower with no door works well at 1400 mm long or more, with the glass panel covering most of that length. At 1200 by 800 mm it is still usable, but spray is more likely to escape the open end. A width of 800 to 900 mm is enough for most people.